K-9 Kube Ute Tray Fitting Requirements

• The K-9 Kube is designed to fit on a tray back utes and the tray can be constructed from steel or aluminium.
• It is critical that the tray is no more than 1400mm from the rear of the tray to the centre of the rear axle as per diagram below.
• This will generally be easy to achieve unless for some reason there has been a longer tray fitted for a special purpose.
• If the K-9 Kube is mounted on a single cab ute it will have the least overhang from the rear axle centre.
• If the K-9 Kube is mounted on a dual cab ute it will have more overhang from the rear axle centre than the single cab or extra cab ute.
• If fitted on a Single Cab the tray is usually about 2400mm long so you have approximately 1000mm in front of the K-9 Kube.
• If fitted on an Extra Cab the tray is usually about 2050mm long so you have approximately 650mm in front of the K-9 Kube.
• If fitted on a Dual Cab the tray is usually about 1800mm long so you have approximately 380mm in front of the K-9 Kube

• A slight suspension upgrade is recommended on the rear of the vehicle that the K-9 Kube is being fitted on.
• The weight of the K-9 Kube is 280kg.
• There are 2 animal compartments and each compartment is 900mm high x 550mm wide x 1050mm deep.
• In most cases K-9 Kubes are installed at Council work depots.